Audioroot eSMART Manual - Page 3
Browse online or download pdf Manual for Battery Charger Audioroot eSMART. Audioroot eSMART 4 pages. 4 bay desktop smart battery simultaneous charger with active thermal management
Print Page8. Front panel status LEDs. These LEDs operate in the same way as the top panel status LEDs.
9. PWM controlled FAN. This fan is enabled/disabled with its dedicated switch as described above in
item #5.
10. IEC C13 mains input socket with ON/OFF switch.
OLED DISPLAY :
The 160x128 pixels OLED display located on the charger's top panel shows valuable information
about each battery connected to the charger as shown below.
The OLED display will show SoC information for a battery only if it is inserted in a charging bay or if
it is actually charging. If no battery is present inside a charging bay, the corresponding SoC portion of the
display will stay blank. If all batteries are fully charged or if all of the charging bays are empty the OLED
display will stay off.
During battery charging, a color changing cross will be drawn every 2-3 seconds in the middle of
the display. This animation is purely esthetic and has no technical function other than dividing the screen
in 4 equal areas. The blinking dots located at the bottom right of each display areas are for debugging
purposes only.
BOX CONTENTS :
1. 1 x eSMART QUAD CHARGER
2. 1 x AC cord (EU, US, UK or AU depending of your region)
3. 1 x user manual
SAFETY PRECAUTIONS :
Do not expose the charger to liquids. The aluminum enclosure is not water resistant.
–
Do not open the charger – no parts are user accessible and high AC voltage is present inside the
–
unit.
Do not cover the air vents, fan or heatsink. Do not obstruct the airflow, this will cause overheating.
–
Place the charger in a cool spot, away from direct sunlight or any external heat sources.
–
http://www.audioroot.fr [email protected]
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation