Audioroot eSMART Li-98Wh Quick Start Manual - Page 2
Browse online or download pdf Quick Start Manual for Battery Charger Audioroot eSMART Li-98Wh. Audioroot eSMART Li-98Wh 4 pages. 2 bay desktop smart battery simultaneous charger
Print Page
UNIT CONNECTIONS AND CONTROLS:
1. Battery charging bay #1
2. Battery charging bay #2
3. OLED display
This display shows all the needed information regarding the SoC (state of charge) of each
◦
batteries. See the "OLED DISPLAY" section of this manual for more information.
4. Front panel status LEDs. Each battery bay has a LED which shows the charging status :
- green flashing : the battery is charging
-
green solid
-
: no battery present in the charging bay
led off
5. 24V Switchcraft 712 DC input jack
OLED DISPLAY :
The 96x64 pixels OLED display located on the charger's front panel shows valuable information
about each battery connected to the charger as shown below. Battery voltage, charging current, cycle
count and battery temperature are displayed sequentially every 3 seconds.
The OLED display will show SoC information for a battery only if it is inserted in a charging bay or if
it is actually charging. If no battery is present inside a charging bay, the corresponding SoC portion of the
display will stay blank. If all batteries are fully charged or if all of the charging bays are empty the OLED
display will stay off.
http://www.audioroot.fr [email protected]
: the battery is fully charged
Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation