Aeware in.zone Manual - Page 11

Browse online or download pdf Manual for Spa Accessories Aeware in.zone. Aeware in.zone 14 pages. Innovative corona discharge ozonator

Print Page

installation

Ozone injection system

B- To install with an air control injector:

This method can be used if the air control valves are closed.

Injection point must be installed on the venturi air line of the spa.

B1- Follow the safety instructions listed at the beginning of

this manual.

B2- Select the venturi line with the best suction and select a

location for the injection point that will lead to the lowest spa

jet in the spa.

B3- Cut the air control tube.

B4- Install a tee with a hose connector (tee with hose connector

and other ﬁ tting can be purchased at your spa dealer store).

Use all material needed to make sure your 1⁄ 4 " ID ﬂ exible tube

will be installed safely.

B5- Connect in.zone so you are sure it will only be activated when

a suction effect is created by the circulation pump.

B6- Don't forget to perform a suction test before powering

up in.zone (refer to suction test page 11).

check

valve

air control

spa

injection point

tee with hose

connector

air venturi line

water

in.zone

hartford

loops

to the spa