Belimo AF230-S US Manual - Page 8

Browse online or download pdf Manual for Controller Belimo AF230-S US. Belimo AF230-S US 11 pages. On-off, spring return fail-safe, 120 or 230 vac

Print Page

Non-direct Mounting Methods

Dimensions

(All numbers in brackets are in millimeters.)

KH-AF non-direct mounting with ZG-108 mounting bracket

Installation Instructions

KH-AF Crankarm Including Retaining Ring. Caution: the

retaining clip supplied with the clamp is not used to mount the

KH-AF crankarm.

The KH-AF (-1) crankarm is used in non-direct coupled

mounting applications. The KH-AF (-1) may also be used to

simultaneously direct couple to a damper shaft and provide an

additional crank arm connection to a second damper. The

KH-AFV V-bolt kit must be used for this non-direct application

(see illustration below).

Two sizes are available:

KH-AF For round shafts up to 3/4" or square shafts up to 5/8"

KH-AF-1 For jackshafts up to 1.05"

KH-AFV V-bolt kit for KH-AF(-1) crankarm

Note: KH-AF (-1) crankarms cannot be used on

AF Series 1 actuators.

Multiple dampers direct coupled to one actuator with

linkage to operate the other damper.

KH-AF (-1)

crankarm

with KH-AFV

V-bolt kit

KH-8

crankarm