3xLogic VX-VTOF-01 Quick Start Manual - Page 7
Browse online or download pdf Quick Start Manual for Security Camera 3xLogic VX-VTOF-01. 3xLogic VX-VTOF-01 10 pages. Visix time of flight people tracking camera
Print Page
3.2
Automatically Identify Camera IP Address with 3xLOGIC Camera Setup
Utility
Using the 3xLOGIC Camera (VSX-IP) Setup Utility is recommended for any network environment as it will find all
VISIX cameras across multiple subnet masks, utilizing mDNS search discovery. Camera information such as IP
Address, Subnet Mask and Gateway Settings will be displayed and can be edited from this utility. To search for
a device, launch the utility (VSXIPUtility.exe).
NOTE:
VSXIP Utility v9.40.0226 or newer is required for detection of the VX-VTOF-1.
Steps:
1.
Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window.
Figure 2-1: 3xLOGIC Camera Setup Utility - Detecting Online Devices
After clicking Detect Online Devices/ Change IP Address on the main page you will be taken to the Online
Devices window. A list of all VISIX devices discovered on your network will be visible.
2.
To select a device, click on the desired device in the generated menu under the Select Online Devices
area.
3.
To change an IP address for a selected VISIX camera in the Detect Online Devices window, select the
desired camera, click on the Change IP Address button. The fields under the Configure IP Address
area will un-grey to allow for manual editing of camera IP addresses as well as other settings.
Figure 2-2: 3xLOGIC Camera Setup Utility - Identifying Device IP Address
4.
When you have finished editing the settings, click Save IP Address to save new changes.
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
VISIX Time of Flight Quick Start Guide | VX-VTOF-01
7