3xLogic infinias eIDC32 Quick Start Manual - Page 13
Browse online or download pdf Quick Start Manual for Gateway 3xLogic infinias eIDC32. 3xLogic infinias eIDC32 17 pages.
Print Page
- 1. Important Safety Instructions
- 2. Before You Begin
- 3. Installation
- 4. Connect to an Ethernet Switch
- 5. Poe SWITCH
- 6. NON-Poe with MIDSPAN Poe INJECTOR
- 7. NON-Poe SWITCH
- 8. NON-Poe with POWER INJECTOR
- 9. DETERMINE the Eidc IP ADDRESS
- 10. CONFIGURE the Eidc with the WEB SERVER
- 11. CONNECT to the Eidc
- 12. CHANGE the Eidc to DHCP or STATIC IP MODE
- 13. WIRE the Eidc DOOR COMPONENTS
- 14. Eidc Web Server: Single Door Application
4. Hardware installation for the eIDC is complete. For software
installation, do one of the following:
• If the eIDC is to be used as a stand-alone unit for a single door,
then go to the
section on page 14.
• If the eIDC is to be used with infinias Access, then refer to
the
• If the eIDC is to be used with Supervisor Plus, then refer to the
"Supervisor Plus Quick Start
QSG-002 / 01-03-2017
eIDC Web Server: Single Door Application
"infinias Access Quick Start
Guide."
Guide."
13