Audiovalve Prometheus 100 Instructions Manual - Page 7

Browse online or download pdf Instructions Manual for Amplifier Audiovalve Prometheus 100. Audiovalve Prometheus 100 15 pages. High power mono block

Print Page

Prometheus 100

power mono blocks

OUTPUT TERMINALS

Output connections for the Loudspeakers are provided on the

lower centre of the rear panel. Two pairs of heavy duty ,

gold plated binding posts for each cannel are supplied.

CONNECT your loudspeaker positive terminal to the

amplifier (+) output terminal. Connect your loudspeaker

negative terminal to the ( - ) output terminal.

POLARITY - PHASING

It is important to achieve good stereo imaging in your

listening room. By observing the wiring constructions

above, each power amplifier / loudspeaker combination

should be in phase. If you experience a poor stereo

image and / or a lack of bass, check that the loudspeaker

wiring has been connnected correctly. We recommend that

you use one of the easily obtainable "test - disc" to help

you ensure both phasing and channel orientation are correct.

If in doupt, consult your Audio Valve dealer for advice.

Quality of the connections must be examined to ensure a high

performance trouble free operation is enjoyed.Check that the

connections are tight, but do not overtighten with excessive

use of spanners etc. If bare wires are used, make sure that no

loose strands of wire short across to the other terminals or

the amplifier chassis. When using plugs such as Banana, be

sure tu use good quality one`s with a firm fit.

connecting recommendations for best match:

Speakers between 4-8 ohm impedance please use the two

lower speaker terminals - thats your prefered terminals.

For loudspeaker more then 8 Ohm please use the top two speaker

terminal