DAPAudio D6140 Manual - Page 13

Browse online or download pdf Manual for Amplifier DAPAudio D6140. DAPAudio D6140 20 pages.

Print Page

PA-303TU

Operating the USB/SD Player

Switching between radio and MP3 playback

Insert a USB stick or a SD stick and push the MP3 (22) button. Now the display will search for an inserted

USB stick or SD card.

The display will briefly show USB if a USB stick is inserted and then proceed in playback mode.

During playback the display will show the current track as shown below.

If a SD card is inserted, the display will show SD instead of USB.

Starting Playback

Push the

(21) button to start playback when you have selected a track from the (optional)USB stick.

or push the

(21) during the pause condition to restart playback.

Stop Playback

There are two ways to stop playback:

Push the

(21) button during playback to pause at that point.

Push the

(28) button during playback.

Pausing

Push the

(21) button to switch between play mode and pause mode. The display in the figure

below shows the USB-player in pause mode.

Note: In case the SD player is selected, the display will show SD instead of USB.

Selecting Tracks

Press the button to move to next higher or lower track. The selected track will be displayed in the

display. The figure below shows that track 2 is selected.

•

Push and Hold the

•

When a new track is selected during playback, playback begins as soon as the skip search

operation

is completed.

•

If the

(21) button is pushed while at the last track, the first track is selected. In the same way,

If the

(20) button is pushed while at the first track, the last track is selected.

Ordercode: D6140

(20) or

(21) button to change tracks continuously at a higher speed.