DAPAudio DM-2000 User Manual - Page 12

Browse online or download pdf User Manual for Amplifier DAPAudio DM-2000. DAPAudio DM-2000 16 pages.

Print Page

DM-1000 / DM-2000

Connection Cables

Take care of your cables by always holding them by the connectors and avoiding knots and twists when

coiling them: This gives the advantage of increasing their lifespan and reliability. Periodically check your

cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely

by using unsuitable or faulty cables.

Unbalanced

Balanced

For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most

professional audio devices. Follow the configuration examples below for your particular connection.

The DM-1000 / DM-2000 requires almost no maintenance. However, you should keep the unit clean.

Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in

liquid. Do not use alcohol or solvents.

Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp

cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.

You do not have to replace the fuse on this device as the fuse is automatic.

01) In case of a power surge, short-circuit or inappropriate power supply, press the reset button located

on the rear of the device, and the device will function normally.

02) Try to determine the cause of the problem, so that the situation does not happen in the future.

Ordercode: D4212 / D4213