DAPAudio DSA-250 Instruction Manual - Page 15
Browse online or download pdf Instruction Manual for Amplifier DAPAudio DSA-250. DAPAudio DSA-250 19 pages. Dsa-series
Also for DAPAudio DSA-250: User Manual (18 pages)
Print Page
Product Specifications
Specification
8 Ω Stereo Power (RMS)
4 Ω Stereo Power (RMS)
8 Ω Bridge Power (RMS)
Frequency Response
TourClass Protection
THD into 4Ω, 1 KHz
SMPER IMD
Slew Rate
Damping Factor
Input CMRR (@1Khz)
Input Sensitivity (@8Ω)
Input Impedance
Hum and Noise
Crosstalk
Class
Input Connectors (per
channel)
Output connectors (per
channel)
Power Supply
Max. Current Draw
220V
Cooling
Controls
Indicators (per channel)
Construction
Dimensions (LxWxH)
Gross Weight
Net Weight
Design and product specifications are subject to change without prior notice.
DSA-250
160W x 2
250W x 2
500W x 1
20 Hz -20KHz: + 0.1 / - 1 dB (1W / 8 Ω)
ACL, IGM, Autoramp, DC voltage, turn-on/off transient, current inrush,
<0.01% @8 Ω
into(50Hz &
7 Khz)
40V/ µs
300:1,1 KHz@8Ω
>60dB
1V for rated
power
20KΩ, balanced
10KΩ, unbalanced
95dB
95dB
>60dB
B
Female XLR (pin 2+), TRS Combo (tip +)
8 A
2 front attenuators, power switch, signal ground lift & mode switches, filter switch
PROTECT LED, CLIP LED, SIGNAL LED, POWER LED
Steel chassis, 16 gauge, double thickness in rack areas
16.5 Kg
18 Kg
12.5 Kg
14 Kg
Website:
Email:
DSA-400
280W x 2
420W x 2
840W x 1
sub/ultrasonic input
<0.1%
<0.01% @18 Ω
into(50Hz &
7 Khz)
40V/ µs
300:1,1 KHz@8Ω
300:1,1 KHz@8Ω
>60dB
1V for rated
power
20KΩ, balanced
10KΩ, unbalanced
>60dB
B
Speakon connectors
230 V / 50 – 60 Hz
7.5 A
2 rear-mounted two-speed fans
482x360x 88 mm
19 Kg
15 Kg
www.Dap-audio.nl
13
DSA-600
400W x 2
600W x 2
1200W x 1
<0.01% @8 Ω
into(50Hz &
7 Khz)
40V/ µs
300:1,1 KHz@8Ω
>60dB
1V for rated
power
20KΩ, balanced
10KΩ, unbalanced
10KΩ, unbalanced
95dB
>60dB
B
10.5A
20.7 Kg
16.7 Kg
DSA-800
500W x 2
750W x 2
1500W x 1
<0.01% @8 Ω
into(50Hz &
7 Khz)
40V/ µs
>60dB
1V for rated
power
20KΩ, balanced
95dB
>60dB
B
15 A