DAPAudio IPS-AS User Manual - Page 10
Browse online or download pdf User Manual for Amplifier DAPAudio IPS-AS. DAPAudio IPS-AS 12 pages.
Print Page
Audio connections.
You can use RCA-type shielded cable. For connecting line level equipment. Please refer to figure 4:
Unbalanced signal
GND
RCA
Fig. 4
Speaker connections.
Speakers are connected using terminal connectors. See the examples below and following page.
Low impedance outputs
You can use as many speakers as you want as long as the total impedance matches the amplifiers
output.
Example 1: using the 4Ω output with two 8Ω speakers.
Fig. 5
Example 2: using the 4Ω output with four 4Ω speakers
Fig. 6
Example 3: using the 8Ω output with two 4Ω speakers.
Fig. 7
High impedance outputs
If using either the 70V outputs or the 100V outputs, note that all speakers should be wired in parallel.
The total power of all speakers summed together should never exceed the total power
of the amplifier in a 70V or a 100V system!
8