Addonics Technologies UDFH15-C User Manual - Page 14
Browse online or download pdf User Manual for Disc Duplicator Addonics Technologies UDFH15-C. Addonics Technologies UDFH15-C 17 pages. Compact usb duplicator controller
Print Page
Compact USB Duplicator controller user manual
6.5. Check Before Copy
This option allows to check device real capacity before copying. By default this option is
disabled.
[Setup]
5. Check Before Copy
6.6. Set Slow Out Threshold
This function allows to set up read/write speed threshold for target devices. When the target
device is causing the copy or compare process delay due to its lower read/write speed and
the rest of the devices in the same batch have to wait for it, the Slow Out Threshold strategy
will be applied as the following: the system will stop the copy or compare process for that
particular target device when its read/write speed is below the threshold for continuing
number of seconds based on the setting, and its red LED will flash to give warning. There are
3 settings to set up.
Read: set up the lowest read speed，and options are OFF, 1MB/s~25MB/s. The default
setting is OFF.
Write: set up the lowest write speed, and options are OFF, 1MB/s~25MB/s. The default
setting is OFF.
Duration: set up the period when read or write speed is lower than the threshold for
continuing number of time, and options are 1~20second. The default is 5second.
6.Setup
[Set Slow Out Thresh>]
Write: OFF
ENT
Use▲▼to change option
[Check Before Copy]
ENT
[Setup]
6. Set Slow Out Thresh>
ENT
[Set Slow Out Thresh>]
Duration: 5sec
ENT
Use▲▼to change option
Page 14 of 17
Disable
Use ▲or ▼ to select
[Set Slow Out Thresh>]
Read: OFF
ENT
Use▲▼to change option
Setup Complete!
ENT