DAPAudio D2141 Manual - Page 13

Browse online or download pdf Manual for Music Mixer DAPAudio D2141. DAPAudio D2141 18 pages.

Print Page

29 / 33. Cross Fader Assign Switch

Switch (29) is used to assign channel 2, 3 or 4 to the A side of the crossfader.

Switch (33) is used to assign channel 3, 4 or 5 to the B side of the crossfader.

Setting one of the switches (29 or 33) to 0, will disable the according side of the crossfader,

30 / 32. Fader Start

This function works in conjunction with a compatible CD player. When used with a compatible CD player,

you can use the crossfader to start and stop a CD player with the slide of the mixer's CROSSFADER.

The ON/OFF SWITCH activates the FADER START feature.

When in the ON position, the FADER START automatically returns the CD player to the preset CUE POINT.

Example: Assume you have 2 compatible CD players or a compatible dual CD player connected to channels

one and two. When the Fader Start option is turned on, sliding the crossfader to the far left position will

trigger playback on CD player 1. When the crossfader is pushed to the far right position, playback on CD

player 2 will begin, and CD player 1 will return to the cue position. Refer to your CD player's user manual for

setting CUE POINTS. In OFF-position the faderstart feature is disabled.

31. Crossfader

This fader is used to blend the output signals of channels A and B together. When the fader is in the full left

position (channel A), the output signal of channel A will be controlled by the master volume level.

The same fundamentals will apply to channel B; Sliding the fader from one position to another will vary the

output signals of channels A and B respectively. When the crossfader is set in the center position, the output

signals of both the channels A and channels B will be even.

34. Crossfader Curve Control

This control adjusts the shape of the crossfader curve from a quick cut (for scratching) to a longer fade (for

mixing).