DAPAudio EDGE EHM-1 User Manual - Page 11

Browse online or download pdf User Manual for Microphone DAPAudio EDGE EHM-1. DAPAudio EDGE EHM-1 20 pages.

Print Page

EDGE EHM-1

Installation of the Batteries

The device is delivered without batteries. It accepts 2 x AA LR6 (alkaline) batteries.

To install the batteries:

Turn the battery cover (04) counterclockwise to remove it.

Insert the batteries into the battery housing (08) (Fig. 04). The devicer operates with 2 x AA LR6

(alkaline) batteries. The batteries are not delivered with the product.

Tighten the battery cover (04) again. Do not overtighten.

Note:

Make sure that you install the batteries with correct polarity orientation.

The device has a power button.

●

Press and hold down the power button (03) for 3 seconds to switch the device on/off.

●

When in the main menu, press the power button (03) to confirm selections and to return to the start

screen.

You can pair the device with the receiver.

Before pairing, scan for unused frequencies to avoid interference. Refer to the user manual of the

receiver.

To automatically pair the receiver with the device, follow the steps below:

Turn the battery cover (04) counterclockwise to remove it.

Put the device near the receiver, so that the IR sensor (06) is as close as possible to the IR sensor of

the receiver.

Pair the receiver with the device. Refer to the user manual of the receiver.

Tighten the battery cover (04) again. Do not overtighten.

Product code: D1477B

Fig. 04