Belimo VRD3-RE2-SET Installation Manual - Page 5

Browse online or download pdf Installation Manual for Engine Belimo VRD3-RE2-SET. Belimo VRD3-RE2-SET 9 pages.

Print Page

VAV-Universal Retrofit-Set

Installation of the new damper actuator (continued)

Installation with form-fit 8 x 8 mm

Adjusting angle of rotation limiter

Note

Incorrect settings can lead to damage to the

damper blade and to a diminishment of the quality

of the control.

Installation of the new VAV controller

Dimensional drawings

Mounting and connecting

www.belimo.eu

Installation

1 m m

The two mechanical end stops for angle of rotation

limiting must be tailored to the conditions of the VAV

unit and are therefore to be adjusted very carefully.

The dismantled actuator is used as an orientation aid

for placing the end stops.

153

140

130

1. Mount the VRD3-R2 VAV controller at a suitable position near the damper actuator

NM24A-V-RE2.

2. Plug the NM24A-V-RE2 actuator with the plug-ready connecting cable into the controller.

M4-VAV-Universal Retrofit Set • en • v1.1 • 04.2011 • Subject to changes

≥ 2 5

5 / 9