Duratool D03124 Manual - Page 6
Browse online or download pdf Manual for Multimeter Duratool D03124. Duratool D03124 10 pages. Digital multimeter autoranging
Also for Duratool D03124: Quick Start Manual (9 pages)
Print Page
GENERAL SPECIFICATION
•
Autoranging digital multimeter
•
AC electric field detection function (NCV function)
•
Data hold function
•
MAX value hold function
•
Backlight
•
Low battery indication
Display
Overload Protection
Auto Power-Off
Operating
Temperature &
Humidity
Storage temperature
& Humidity
Power Supply
Safety Class
Dimensions
ELECTRICAL SPECIFICATION - DC VOLTAGE
Range
Resolution
200mV
0.1mV
2V
0.001V
20V
0.01V
200V
0.1V
600V
1V
AC VOLTAGE
Range
2V (40Hz-400Hz)
20V (40Hz-400Hz)
200V (40Hz-400Hz)
600V (40Hz-200Hz)
3½ digit LCD
Used the PTC protection for resistance, temperature and
frequency measurement.
If the meter is idle for 15 minutes, the meter automatically
turns off.
After auto power-off, pushing any button or turning the
rotary switch can turn the meter on again.
Note: After auto power-off in AC mode, if changing the
rotary switch to DC mode, the power will not turn on again.
Note: The meter enters sleep mode after auto power-off.
The auto power-off function is disabled if you press "HOLD"
to re-power on, while in sleep mode.
0 ~ 40°C (32 ~104°F) & < 80% RH
-10 ~ 50°C (14 ~ 122°F) & <70% RH
9V battery (6F22 or 1604A Type)
IEC 61010-1, CAT II 600V
140mm x 67mm x 30mm (L x W x H), approx. 112g
Accuracy
±(0.5% rdg + 2 counts)
±(0.8% rdg + 2 counts)
Resolution
0.001V
0.01V
±(0.9% rdg + 3 counts)
0.1V
1V
±(1.2% rdg + 3 counts)
• Overload protection: SG (Spark
Gap) used to protect from voltage
over 1500V.
Accuracy
6
• Overload protection:
SG (Spark Gap) used
to protect from voltage
over 1500V.