Duratool D03126 Manual - Page 3
Browse online or download pdf Manual for Multimeter Duratool D03126. Duratool D03126 8 pages. Digital multimeter with backlight
Print PageIMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
Important safety information. Read the instructions carefully.
!
High voltage. Danger.
Ground.
Double Insulation (Class II safety equipment).
Fuse must be replaced as per the specification herein.
200mA/250V
•
When using electrical appliances basic safety precautions should always be
followed.
•
Do not exceed the protection limit values specified for each range range of
measurement.
•
Never use the meter to measure voltages that might exceed 600V above earth
ground in category II installations.
•
When the value scale to be measured is unknown beforehand, set the range
selector to the highest position.
•
Before rotating the range selector to change the functions disconnect the test
leads from the circuit under test.
•
When measuring a TV set or switching power supply, watch out for pulses in the
circuit that may damage the meter.
•
Before working with and measuring voltages higher than 60V DC or 30V AC RMS,
keep your fingers behind the probe barriers.
•
Before attempting to insert transistors for testing, always be sure that the test
leads have been disconnected from any measurement circuits.
•
Components should not be connected to the hFE socket when making voltage
measurements with test leads.
•
Do not perform resistance measurements on live circuits.
•
The instrument can only be used in conjunction with the test leads supplied. If
necessary, they must be replaced with the same type and specification.
WHAT'S INCLUDED?
•
One instruction manual
•
One digital multimeter
•
Set of test leads
•
One 9V battery, NEDA 1604 6F22 006P type
•
Holster (optional)
This meter is a handheld 3½ digital multimeter used for measuring DC and AC voltage,
DC current, resistsance, diode, transistor and continuity.
3