Duratool D01965 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Drill Duratool D01965. Duratool D01965 12 pages. 18v li-ion cordless drill driver

Print Page

Adjusting the torque

The torque is adjusted by rotating the torque setting（4）, the torque is greater when

the torque setting is set on a higher position. The torque is less when the torque setting is

set on a low position"1"denote lowest and "Drill bit image " denote highest. Torque is set by

material, you can adjust suitable torque, if the screw is long and material is hard, you can

adjust to a bigger setting.

Before use for drilling, the torque setting should be set on drill position " ".

When drilling hard smooth surface, use a center punch to mark the desired hole

pressure to keep the bit cutting.

Do not force or apply side pressure to elongate a hole.

Fig. 5

The drill has a two-speed gear train designed for drilling at LOW (1) or HIGH

(2) speed. A gear selector is located on top of the drill to select either LOW (1) or HIGH (2)

speed. When you select LOW (1) speed range, the speed will decrease but will provide more

power and torque. When using drill in the HIGH (2) speed range. Speed will increase but will

provide less power and torque. Use LOW (1) speed for high power and torque application

and HIGH (2) speed for fast drilling applications.