DAQ system PCIe-DIO13 User Manual - Page 5

Browse online or download pdf User Manual for PCI Card DAQ system PCIe-DIO13. DAQ system PCIe-DIO13 19 pages.

Print Page

2-2 Camera Link Cable and Connector

The connection between the camera link cameras and PCIe-DIO13 board uses the 26 Pin MDR

cable. The Camera Link cable consists of twin-axial shielded cable and 2 Mini MDR 26-male plug.

The bottom of Figure 2-2 Camera Link cable is typically used.

The 26-Pin MDR Connecter is located at the end of the cable as like Figure 2-3, Figure 2-4 is

26-Pin MDR Connecter, placed at the Camera or Frame Grabber. As shown in the figure, the pin

numbers are cross-linked to each other, Transmitter and Receiver of Camera and Frame Grabber

signals are connected cross each other.

[Figure 2-2. MDR-26 Camera Link Straight Cable]

[Figure 2-3. MDR-26 Cable(Male) Pin Out]

[Figure 2-4. MDR-26 Connector(Female) Pin Out]

PCIe-DIO13 User's Manual