DuraTrel Courtyard Arbor 11111 Assembly Instructions - Page 4

Browse online or download pdf Assembly Instructions for Outdoor Furnishing DuraTrel Courtyard Arbor 11111. DuraTrel Courtyard Arbor 11111 5 pages.

Print Page

Set both arbor panels on end with screw pilot holes facing outside of arbor. Insert ends of each 84" arbor top

rail (part 6) through top routed hole in each post. Make sure 2" sq. routed holes face one another. Gently

separate tops of each arbor panel few inches. With pilot holes facing top of arbor, insert five 26¾" arbor top

cross rails (part 8) into arbor tops. When inserting two outer most parts, insert into post and then into 84"

arbor top to lock arbor together. Using four 1¼" screws per post, screw together top and middles of each arbor

panel. Be sure all parts are full inserted before securing.

Place two 84" arbor top overhead rails (part 7) onto five arbor top cross rails with pilot holes lining up. Using

five 1¼" screws per part, fasten overhead rails to top cross rails.

Apply glue to inside edges of 4" sq. gothic caps (part 9) and place on top of each post. Apply glue to inside

edges of ⅞ x 1½" end caps and place on ends of overhead rails. Apply glue to inside of 4" end caps and press, do

not slide, onto ends of arbor top rails.

Courtyard Arbor 4