Duratuf KIWI MK1A Assembly Instructions Manual - Page 9
Browse online or download pdf Assembly Instructions Manual for Outdoor Storage Duratuf KIWI MK1A. Duratuf KIWI MK1A 16 pages.
Print PageMK1A FIXED WINDOW (Optional)
Step 1: Lay out the two window studs (883mm) and
Nog (590mm) on a flat surface. Position
Nog and nail in place using two 75mm nails
at each end.
Follow Steps 2 - 5 on page 8.
Step 6: From the outside of the shed, place glass
in Window Frame. Attach a Glazing Bead
(G100) with three rivets to each side of the
Window Frame to hold glass in place. Pre-
drilling Glazing Beads is recommended.
MK1A DOOR JAMB & CORNER FLASHINGS
Step1: Fit Door Jamb Flashing (104) in between
Top and Bottom Plates and hard against
Stud. Attach Door Jamb Flashing with
three rivets into Rib on the outside and
three 30mm clouts into studs on the in-
side. Repeat with the other Door Jamb.
CLADDING
CORNER
FLASHING
Step 2: On the left hand side of the front wall fit
Corner Flashing (101) over Door Jamb
Flashing and rib . With top of the Corner
Flashing flush with the top of the Top
Plate, rivet in place using six rivets.
9
570mm
END
PLATE
STUD
FRONT PLATE
DOOR JAMB