DARCHE Panorama 2 Manual - Page 10

Browse online or download pdf Manual for Tent DARCHE Panorama 2. DARCHE Panorama 2 13 pages. Roof top tent

Print Page

FITTING THE ROOF TOP TENT TO YOUR ROOF

RACK

1. Place the Roof Top Tent on top of your vehicle's roof rack system

(minimum 2 persons required).

2. Place 55mm Steel M8 bolt into the slide plates. Slide the plates and bolts into the

mounting channel. You will need to lift a Roof Top Tent side, so as to have one of the

bolts on the inside of the roof rack bar.

3. Inspect the position of Roof Top Tent to ensure it is centered on the roof rack and

positioned to open the desired side.

Roof Top Tent Base

55mm Steel M8 Bolt

Steel Mount Plate

DIAGRAM D

4. Attach the Roof Top Tent to your roof rack at the four points where the rack and

mounting channels cross. Tighten all eight bolts securely. It is important that you check

all the mounting bolts and brackets periodically to ensure they are securely fastened to

your base and roof rack or after-market roof bars.

5. After ensuring the Roof Top Tent is positioned correctly, and all eight bolts are

tightened securely, insert the rubber end caps into the ends of the mounting

channel (this may require light taps from a hammer).

Mounting Channel

M8 Nylock Nut

Slide Plate

After-Market Roof Rack Bars