DuraVent DuraTech Installation Instructions Manual - Page 8

Browse online or download pdf Installation Instructions Manual for Ventilation Hood DuraVent DuraTech. DuraVent DuraTech 12 pages. Combustion air system

Print Page

ATTACH FLEx ADAPTER

OVER STOVE AIR INLET

BY USING (4) SCREWS.

SECURE FLEx TO

FLEx ADAPTER BY

USING HOSE CLAMP

PROVIDED.

AIR MUST BE ALLOWED TO

FLOW UNDER COLLAR INTO

CEILING SUPPORT. DO NOT

SEAL OPENINGS BETWEEN

COLLAR AND CEILING

SUPPORT.

Figure 9

ATTACH ELBOW TO BRANCH

OF ADAPTER WITH (3) SCREWS

PROVIDED.

ATTACH FLEx TO STOVE

AND ELBOW USING HOSE

CLAMPS PROVIDED

Figure 8

of the Adapter. Additional lengths of CAS

Connector pipe can then be installed using the

screws provided to secure the pipe lengths

(male end up, female end down) (Fig 7). A

Telescoping Length will likely be needed. The

final CAS Connector Pipe section is installed

into the bottom of the CAS Ceiling Support and

secured using (3) 3/8" screws provided.

available to provide adjustment in the

connector pipe. The CAS Telescoping Length

are available in 14"-24", 29"-46", or 40"-68"

sizes. Once the adjustable length is at the

TIGHTEN COLLAR AROUND CHIMNEY

SECTION. SLIDE COLLAR DOWN TO

REST ON TOP OF CEILING SUPPORT.

Figure 10

CAS Telescoping Lengths are