APLIC 20200730SZ002 User Manual - Page 6
Browse online or download pdf User Manual for Enclosure APLIC 20200730SZ002. APLIC 20200730SZ002 20 pages. Hard disk enclosure, usb 3.2 gen1 , m.2
Print PageThank you for choosing a Aplic product. Please read the following user manual
carefully to have an enjoyable experience with your purchased product. Before
using the delivered product, check that it is complete, faultless and undamaged.
1. Scope of supply
• USB 3.2 Gen1 , M.2 hard drive enclosure
• Screwdriver
• User manual
2. Technical data
Connection
Max. SSD sizes (length)
Suitable hard drive size
Note: This enclosure is not compatible with M.2 SATA SSD M-key and M.2 PCI
Express!
3. Initial use and installation
Take the device out of the package and remove all the packaging material. Open
the hard drive enclosure using the provided screwdriver by loosening the screws
on the bottom of the enclosure. After loosening the screws, you need to remove
the cover and take the PCP out. Now connect the desired M.2 SATA SSD and
mount it using the screw provided. When inserting the board take care the
locking mechanism of the case is properly linked to the mechanical fixture on the
board.
6
USB 3.2 Gen1
30mm, 42mm, 60mm, 80mm
• M.2 SATA SSD B-Key
• M.2 SATA SSD B & M Key