Aplisens WW-11ALW User Manual - Page 10
Browse online or download pdf User Manual for Monitor Aplisens WW-11ALW. Aplisens WW-11ALW 20 pages.
Print Page
EN.IO.WW.11.ALW
7.
INSTALLATION
7.1. General recommendation
WW-11ALW displays are intended for direct mounting on flat surface or on pipe using mounting kit.
In order to mount the display on a flat surface, e.g. a wall, the holes fo M6 screws should be prepared
for its surface according to the spacing of the holes in the display housing. Then the display shall be
fixed to the wall using screws. Mounting on the pipe shall be carried out according to the figure 3.
WW-11ALW display is adapted for assembly on vertical or horizontal pipe with max. diameter
65 mm. Prism-shape cut outs executed in the rear part of the housing are used for this purpose.
Figure 3. Example of installation of WW-11ALW display on pipe.
Table 2. Mounting kit list.
The mounting kit includes: clamping rings (2), washers (3), (4) and nuts (5).
Place display on the pipe in the desired position. Place clamping rings (2) in openings in the housing.
Place washers (3) and (4) on the threaded parts of the clamping rings and tighten with nuts (5).
10
Item No.
1
Display WW-11ALW
2
Clamping ring
3
Flat washer 6.4
4
Spring washer 6.1
5
Nut M6
6
Pipe
Description
Quantity
1
2
4
4
4
-
Revision 01.B.003/2020.09