Apodemus BatLure Manual - Page 3
Browse online or download pdf Manual for Pest Control Apodemus BatLure. Apodemus BatLure 8 pages.
Using your BatLure
The first time you use your BatLure you will need to prepare it for use:
-
Place batteries
-
Place an SD card
-
Power-on the device
Placing the batteries
1. Open the battery lid by loosening the thumbscrew;
2. Pull-out the battery holder;
3. Place eight fresh AA (penlight) batteries of the same type and charge in the holder;
4. Put the battery holder back in the BatLure. Make sure the contact pins are put in first with the
pins on the right-hand side;
5. Close the battery lid with the thumbscrew.
(Re)Placing an SD memory card
1. Open the battery lid by loosening the thumbscrew;
2. Remove old SD card (if present): push it in further and it will come back out when released;
3. Place a new SD card with playable wave files. Make sure the contacts are facing up (SD card
is upside down);
4. Close the battery lid with the thumbscrew.
* To create a new SD card please see the regarding chapter.
Turning on the BatLure / Starting the BatLure
1. Push the power button once, the device will power up.
2. Your BatLure is now on and it will play all available files as instructed in the configuration file.
* The BatLure will show the battery status for five seconds on its volume led's.
Turning off the BatLure
1. Push and hold the power button for approximately one second.
Version: 2014-11-18