Apogee QUICK DRAW Manual - Page 10

Browse online or download pdf Manual for Toy Apogee QUICK DRAW. Apogee QUICK DRAW 12 pages.

Print Page

2-11. DO NOT GLUE - Slide the aft centering ring (ring F)

over all three motor tubes, and rotate the tubes so that

the engine hooks align with the notches in the aft ring,

and are all facing the same direction.

2-12. Rotate the latch assembly, so the latch is facing

away from you. Apply glue to the interior of the three

holes. Quickly install the front of the motor mount tubes

in the latch assembly centering ring, Press the tubes all

the way into the front centering ring and get the tubes as

square as possible.

2-13. Once the tubes are secure at the latch assembly,

apply glue at the 5/8" (16mm) marks of all tubes and slide

the aft centering ring into place.

2-14. Apply wood glue to the joints between the centering

rings and motor tubes, then form fillets with a finger tip.

Allow the removable mount to dry entirely before install-

ing in a rocket.

Adjusting Mounts for Correct Fit

To adjust the fit of the removable mount, the tabs may

need to be filed down somewhat. This compensates for

slight inaccuracies in both the fixed mount and remov-

able mounts. To test, insert the removable mount into the

rocket and rotate it until the tabs on the latch drop into

the slots in the fixed mount. Rotate the removable mount

clockwise to latch. If the removable mount refuses to

rotate or is overly stiff, take the mount out and use a flat

needle file to remove material from the aft side of each

of the tabs (as shown here with the 3x24mm mount).

Repeat this process of testing and removing material until

the mount rotates and latches without binding

*Quick Draw Suggested Motor Charts

1x29mm Motor Mount:

Manufac-

Engine

turer

Loaded

Estes

E16-4

Cesaroni

F36SS-6

AeroTech

F27R-4

Cesaroni

F31CL-6

AeroTech

F25W-6

Cesaroni

G88SS-8

AeroTech

G25W-6

Page 10

Est. Altitude

Motor Type

Single Use

548

Reloadable

792

Single Use

1008

Reloadable

1075

Single Use

1538

Reloadable

1695

Reloadable

2551

Step 2- 11

Step 2- 12

Step 2- 13

Slide centering ring

into position

Step 2- 14

Remove materials

from backside of tabs

2x29mm Motor Mount (Sold Separately):

Manufac-

turer

Estes

Cesaroni

2 x F36SS-8

Estes

Cesaroni

2 x F29IM-8

AeroTech

2 x F25W-9

167

241

3x24mm Motor Mount:

307

Manufac-

328

turer

469

Estes

517

Estes

778

Quest

3 x D22W-7

Estes

Ring F

Slide centering ring

into position

Engine

Motor Type

Loaded

2 x E16-4

Single Use

Reloadable

2 x F15-6

Single Use

Reloadable

Single Use

Engine

Motor Type

Loaded

3 x C11-5

Single Use

3 x D12-5

Single Use

3 x E12-6

Single Use

5/8"

(16mm)

16mm

Est. Altitude

1186

362

1601

488

1952

595

2101

641

2734

834

Est. Altitude

390

119

965

294

1177

359

1613

492