Apollo 58000-010 Installation Manual

Browse online or download pdf Installation Manual for Marine Equipment Apollo 58000-010. Apollo 58000-010 2 pages. Open area voice sounder
Also for Apollo 58000-010: Installation Manual (2 pages)

Print Page

Apollo Fire Detectors Limited, 36 Brookside Road, Havant, Hants, PO9 1JR, UK

Tel +44 (0)23 9249 2412 Fax +44 (0)23 9249 2754

Email: techsales@apollo- re.co.uk Website: www.apollo- re.co.uk

39214-601/2018/Issue 5

Discovery

General

This guide describes the installation of the following products:

Part Number

58000-010

58000-020

58000-030

58000-040

Warning

The Discovery Open Area Voice Sounder requires compatible control panel software to

operate. Please check with the panel manufacturer for compatibility before installation.

Function*

The Open Area Voice Sounder Visual Indicator has 3 tone/message pairs, 7 volume set-

tings, independent control of sounder and visual indicator and fast turn-on functions. The

con guration of the sounder is set by the control panel. Please refer to the panel literature

for details.

Mounting the backbox

The backbox is removed by using an unlocking key to press in one of the retaining lugs.

The Open Area Voice Sounder has 6 slotted drillable holes in the backbox and can be

installed directly to the mounting surface.

Wiring Details

Note: This product is polarity sensitive (supply reversal protected) and will not function if

wired incorrectly.

Drill holes for cable entry as appropriate for the installation. Drill guides are marked on the

backbox. Connect the loop cables to the terminal block, observing polarity and func-

tional earth/screen if applicable. The wiring terminals accept solid or stranded cables up

to 2.5mm².

Commissioning

It is important that the device be fully tested after installation. Many fault conditions are

the result of simple wiring errors. Check all connections to the unit.

Setup and Test Mode

These modes allow volume adjustment and functional testing locally. In test mode no

volume adjustment is possible.

The required mode is entered via the control panel and is con rmed by a red setup LED

which ashes once a second. Sounder state is controlled by placing a magnet adjacent

to the ashing setup LED. When the con rmation LED ashes, withdraw the magnet. A suit-

able extendable magnetic wand is available, part no. 29650-001.

*The Visual Indicator function does not comply with the requirements of EN54-23

Open Area Voice Sounder

Installation Guide

Product Name

Discovery Open Area Voice Sounder with Isolator

Discovery Open Area Voice Sounder Visual Indicator

with Isolator

Discovery Open Area Voice Sounder Visual Indicator

with Isolator

Type

Colour

Indoor (Type A)

Red

Indoor (Type A)

White

Indoor (Type A)

Red

Indoor (Type A)

White