Apollo XPA-CB-11170-APO Commissioning Manual - Page 7
Browse online or download pdf Commissioning Manual for Smoke Alarm Apollo XPA-CB-11170-APO. Apollo XPA-CB-11170-APO 14 pages. Diversity loop interface module
Also for Apollo XPA-CB-11170-APO: Installation Manual (2 pages), Commissioning Manual (19 pages)
Menus explained
Menu structure - the Interface menu structure is as follows:
Initial power-up screen - the initial power-up screen shows the details that follow:
Menu options
Menu Level (1.0)
Device Status
This menu shows the status of logged-on devices. The loop address as determined by the XPander
XPERT card (1 - 126). the logged-on status and type are shown.
Add New Device
Remove Device
Interface Status
Radio Channels
Menu
Device Status (1.0)
Add New Device (2.0)
Remove Device (3.0)
Interface Status (4.0)
Radio Channels (5.0)
No. of devices
No. of logged
logged onto
on devices in
interface
alarm condition
DEV 00 AL 00 FT 00
Loop address determined by
the XPERT card or DIL switch
??? = No address assigned
or illegal address
Note: Combined sounder visual indicator base shows two addresses, first address in the detector
followed by the sounder visual indicator as shown below.
Detector
Fault Status (1.1)
Alarm Status (1.2)
Device
Battery Level (1.3)
Address
Signal Level (1.4)
Manual Update (1.5)
Ident (1.6)
Fault Status (4.1)
Background Level (4.2)
Fast Test (4.3)
Ident (4.4)
Currently Used (5.1)
Auto Select (5.2)
Manual Select (5.3)
No. of logged on
devices in fault
condition
Optic = Optical Detector
Sound = Sounder Device
I/O = Input/Output Device
Radio = Loop Interface Module
Multi = Multisensor Detector
= Logged On with fire present
Heat = A1R Heat Detector
L
= Logged On with address assigned
H Temp = CS Heat Detector
A = Logged On without address assigned
MCP = Manual Call Point
!
= Logged On with fault present
Cmb = Combined Sounder Visual
X = Dual address on Interface
??? = Unknown Device
Addr 067 L Optic
Addr 004 ! 005 Cmb
Sounder Visual Indicator
PP2286/2019/Issue 13
Page 6 of 12
Indicator Base