Apollo 7100UL Installation Manual - Page 3

Browse online or download pdf Installation Manual for Gate Opener Apollo 7100UL. Apollo 7100UL 17 pages. Residential & medium duty commercial slide gate operator

Print Page

IMPORTANT SAFETY PRECAUTIONS

IMPORTANT - READ CAREFULLY BEFORE BEGINNING INSTALLATION

WARNING—To reduce the risk of injury or death:

• Read this installation manual completely prior to installation.

• Installation should be performed by a professional installer.

• Required welding should be performed by a qualified welder.

• Should electricity be required, use a certified electrician only.

• Any device that requires 120 Volts AC should be U.L. approved.

• Review with the owner all safety concerns including:

⇒

Do not operate the gate unless area around gate is in full view.

⇒

Do not allow children or adults to "ride" on gate during operation.

⇒

Do not allow children to play in the gate area.

⇒

Periodically test the obstruction sensitivity to assure safe and

proper operation. **Do not test sensitivity by standing between the

gate and the hinge or stop post.

⇒

Keep the remote control away from children.

⇒

The "CAUTION AUTOMATIC GATE" sign should be clearly visible

from both sides of the gate.

⇒

Always insure that the gate has closed securely before leaving

area.

⇒

Arrange with local fire and law enforcement for emergency access.

⇒

Always keep people and objects away from the gate. No person

should cross the path of the moving gate.

• Recommend safety devices such as loop detectors, edge switches, and

beam detectors when applicable.

• Install control devices such as keypads far enough away (5 feet or further)

from any moving parts of the operator and gate to prevent possible injury.

• Always disconnect the battery or power source when making adjustments

or repairs to any part of the gate or operator.

• All rollers should be covered to prevent injury.

Test the gate operator monthly. The gate must reverse on contact with a rigid

object or stop when an object activates the non contact sensors. After adjust-

ing the force or limit of travel, retest the gate operator. Failure to adjust and

retest the gate operator properly can increase the risk of injury or death.