Acer AT350 F1 Series Specifications - Page 7

Browse online or download pdf Specifications for Server Acer AT350 F1 Series. Acer AT350 F1 Series 23 pages.

Print Page

Acer AT350 F1 Specifications

Expansion slots

The primary I/O bus for the main board is PCIe

PCI-E bus segments.

PCI express

Bus Segment Characteristics of PCI Express

Expansion Slot #

PCIe

Acer Flex I/O

NOTE:

1. Indicates the number of physical electrical lanes running to a PCIe

2. Inserting cards with PCI™ bridges may alter the actual bus assignment number.

3. Slots are enumerated differently based on the operating system. Microsoft® operating systems

enumerate Device ID by bus starting from the lowest bus to the highest.

Storage controllers

Integrated Serial ATA

controller

Gen2. The following table lists the characteristics of the

# of

Type

slots

PCIe

Gen 2

PCIe

Gen 2

PCIe

Gen 1

PCIe

Gen 2

Intel 82801JR (ICH10R) I/O Controller Hub

Note: Onboard SATA software RAID cannot be enabled when add-on SAS RAID is

enabled.

Simultaneous drive

transfer channels

Transfer rate

synchronous

(maximum theoretical)

Data transfer method

Drive support

Data transfer modes

Protocol

Feature

RAID levels supported 0, 1, 5, 10 (Windows

RAID features

RAID OS support

Topology

Bus

Vol.

Width

3.3V

connector.

6 channels

3 GB/s per channel

non-RAID mode

RAID mode

Serial ATA

Legacy mode

Combined mode

Serial ATA

NCQ (Native Command Queuing)

AHCI (Advanced Host Controller Interface)

)

0, 1, 10 (Linux)

• Supports multiple logical volumes

• Supports setup through ROM based array

configuration utility installation scripting

NOTE: This controller requires the software RAID driver to

support hot-plug functions.

Windows Server

2008

Windows Server

2008 R2

Red Hat

Enterprise Linux 5.4

SUSE

Linux Enterprise Server 11

Con.

Length

Width

x16

Full height