Apollo Sprayers MAXI-MISER PBC7600-GTO Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Paint Sprayer Apollo Sprayers MAXI-MISER PBC7600-GTO. Apollo Sprayers MAXI-MISER PBC7600-GTO 20 pages.

Print Page

Chart A

Nozzle, Needle and Air Caps for PBC7600-GTO Spray Guns

TIP/NEEDLE

SIZE

Inks, Dyes, Stains, extremely thin viscosity fluids, Water

0.8MM (.031)

based finishes

All purpose, thin lacquers, thin enamels, Water based

1.0MM (.039)

finishes, Automotive, Marine, Airplane finish

Same as 1.0mm above except slightly higher viscosity

1.3MM (0.051)

Catalyzed lacquers, Conversion Varnish, Primers,

Automotive, Marine, Airplane finishes, Varnish, High

1.5MM (.059)

Viscosity Industrial Coatings, Urethanes, Enamels.

Same as 1.5mm above except slightly higher viscosity

1.8MM (0.07)

Thinned latex paint, Multi-spec, Heavy Primers,

2.0MM (.079)

Butyrate, nitrate dope, High Viscosity Industrial Coatings

Thinned latex paint, Multi-spec, Solvent adhesives, Wax

2.5MM (.098)

based strippers

When pairing the 7600 needles and nozzles together it is important to look at the markings on both the needle and the

nozzle. The nozzle has the actual size laser marked onto the side of the nozzle itself. The needle has a stock number laser

marked onto the shaft. The first 3 numbers of the stock number do not mean anything. The last 3-4 numbers are the size of

the needle.

Below, we have put together a chart showing what the various nozzle sizes we offer for the 7600 series spray gun and the

corresponding needle identification numbers which they are paired with. If you have any questions, please give customer

service a call at 1-888-900-4857.

Please note: The 1.3mm and 1.5mm nozzles use the same size needle. The 1.8mm and 2.0mm nozzles use the same size

needle also. All other size nozzles are paired with only one needle size.

NOTE: Every time you change nozzle sizes you will need to reseat the air distributor gasket, item #5. To do so, pull

it out of the front of the air distributor and reinstall it so that it is flush with the front of the air distributor.

FLUID NOZZLES, NEEDLE ASSEMBLIES, AIR CAPS & VISCOSITY

APPLICATION

7600 Nozzles and Needle Identification

Nozzle Size

0.8mm

1.0mm

1.3mm

1.5mm

1.8mm

2.0mm

2.5mm

VISCOSITY

ZAHN #2

16 seconds

16-18 seconds

17-20 seconds

18-24 seconds

20-22 seconds

24-35 seconds

35+ seconds

Needle Identification

20108

20110

2011315

2011820

20125

AIR CAP

B or B-HS

C or C-HS

D or D-HS