Apollo Sprayers T5020 MIST APPLICATOR Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Paint Sprayer Apollo Sprayers T5020 MIST APPLICATOR. Apollo Sprayers T5020 MIST APPLICATOR 10 pages.

Print Page

General Safety Information cont'd.:

and fittings. The Spray Gun does not function when clogging occurs.

• When not in use, be sure to disconnect the hose and place the Spray Gun into the holder in the turbine to avoid

tipping.

GROUNDING INSTRUCTIONS

This product must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical

shock by providing an alternate path for the electrical current.

This product is equipped with a cord that has a ground wire and an appropriate ground plug. Plug the unit into an outlet

that is properly installed and grounded in accordance with local codes and ordinances.

RESULT IN THE RISK OF

ELECTRICAL SHOCK. IF REPAIR OR REPLACEMENT OF THE PLUG OR CORD IS

NECESSARY, DO NOT CONNECT THE GROUND WIRE TO EITHER FLAT BLADE TERMINAL.

THE WIRE WITH GREEN INSULATION (WITH OR WITHOUT A YELLOW STRIPE) IS THE

GROUNDING WIRE.

1. For any question regarding proper installation of the ground plug, consult a qualified

(licensed or certified) electrician.

2. Do not modify the plug provided. If the plug does not fit the outlet, have the proper

outlet installed by a qualified electrician.

3. This product is for use on a nominal 120-volt circuit and has a grounding plug that

looks like the plug in Figure 2. Make sure that the product is connected to an outlet

having the same configuration as the plug. No adapters should be used with this

product.

4. If an extension cord is required, use only a three wire extension cord that has the

same configuration as the unit cord, including the (round) ground terminal. Make

sure that the extension cord is plugged into a properly grounded receptacle.

5. When using an extension cord, be sure it is in good condition and heavy enough to

meet the specifications in the chart below. If an extension cord is needed the

following wire sizes must be used.

6. (See Chart 1) Figure 2

• Tipping the Spray Gun causes the Spray Gun to clog. Dried spray material

also clogs the pressure delivery tube

IMPROPER INSTALLATION OF THE GROUND PLUG CAN

25' cord.................................10, 12, or 14 Gauge

50' cord.......................................10 or 12 Gauge

100' cord.............................................10 Gauge

Chart 1 Extension Cord Requirements