DURAVIT SensoWash 217351 Series Mounting Instructions - Page 4

Browse online or download pdf Mounting Instructions for Toilets DURAVIT SensoWash 217351 Series. DURAVIT SensoWash 217351 Series 20 pages. One-piece water toilet

DURAVIT SensoWash 217351 Series Mounting Instructions

Important information

About the mounting instructions
These mounting instructions come as part of the
Duravit Shower WC and should be read carefully prior to
installation.

Explanation of the key words and symbols

DANGER!
At high risk of fatal hazards or
serious injuries
NOTE!
To avoid property damage
Link to the Electrical Installation section
Link to the installation information in this
section
Link to the Water Installation section
Inspection (e.g. for scratches)
Inspection to collect water
Do not kink hose
Target readership and qualifications
The Shower WC and associated water connection may
only be installed by qualified plumbers. The electrical
installation may only be carried out by qualified electri-
cians.
NOTE!
Local installation regulations, country-specific standards
and the low voltage directives must be observed at all
times.
NOTE!
Do NOT install the Shower WC in rooms where there is a
danger of frost. The room temperature must not be less
than 4 °C (39 °F).
4

Safety instructions

DANGER!
Risk of fatal electric shock.
> Do NOT remove individual Shower WC components.
> If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.

Installation instructions

Please read pre-installation data sheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
The Shower WC unit installation is described in separate
instructions.
4
Preparing the floor drain (Diagram 4)
> Please observe the enclosed instructions.
Positioning and fixing the toilet to the wall
16
(Diagram 16)
> Please observe the enclosed instructions.
SensoWash_MAL_1pWC_54040/16.07.6