Data EOC Master CD7944N Product User Manual - Page 10

Browse online or download pdf Product User Manual for Switch Data EOC Master CD7944N. Data EOC Master CD7944N 18 pages. Device install guide

Print Page
Data EOC Master CD7944N Product User Manual
Power waveform: Sine wave distortion is not more than 3%.

2.3 Construction Specifications

2.3.1 EOC Master Installation

1.
The equipment installation position should meet the design requirements. In case of
any changes, it must be approved by the design and construction unit and complete
change procedures.
2.
The equipment installation must be stable and firm. When placed in the air, the
buckle sling should be firmly connected to the equipment and fastened.
3.
Take measures to prevent dust from entering the equipment and accumulating
hardware failure.
4.
When installing the EOC master, It's careful to securely install the equipment in the
designated location. And take good anti-theft measures.
5.
The shell of the EOC master is waterproof. After you have completed the necessary
debugging operations during installation, you must adjust the waterproof ring, close
the shell properly, and tighten all bolts. For interfaces with inlet-outlet line, the
waterproof head must be screwed tightly so that the interface is closely fitted with the
cable without leaving a gap. For interfaces without inlet-outlet line, you can use
waterproof plugs to seal them directly.

2.3.2 EOC Slave Installation

1.
The temperature and humidity of the EOC slave operating environment cannot
exceed the required range.
2.
The EOC slave needs to be stably installed to avoid sliding and hanging.
3.
The EOC slave installation location must have enough space for natural heat
dissipation.
4.
After the installation is completed, the equipment status indicator should be in a
convenient position to facilitate debugging and maintenance.
Company Address: Room 601, Floor 6, Building F, Songbai Road 1008, Sunshine Community，Xili Street, Nanshan District, Shenzhen(518108)
Factory Address: Fl1, Bldg B, Wentao Industrial zone, Yingrenshiyongxin Village, Shiyan Street, Baoan district, Shenzhen, Guangdong, China (518055)
Tel: +86-755-26014509/4710/4711 Fax:+86-755-26014506
Website: www.cdatatec.com
8