Duren 625626 Product Instruction Manual - Page 5

Browse online or download pdf Product Instruction Manual for Sander Duren 625626. Duren 625626 8 pages. 75mm air polisher

Print Page
Duren 625626 Product Instruction Manual
625626
Instruction Manual
4
It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Quick Release Couplings. See Fig. 2 for recommended setup.
5
Water in the air supply will cause the internal bearing of the tool to rust and eventually
seize.
6
Make sure that your airline is free from water at all times.
7
4
It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Always select the correct sanding disc grit for the job.
Quick Release Couplings. See Fig. 2 for recommended setup.
Tools Included with your Sander
5
Water in the air supply will cause the internal bearing of the tool to rust and eventually
seize.
4
It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
6
Make sure that your airline is free from water at all times.
Quick Release Couplings. See Fig. 2 for recommended setup.
7
Always select the correct sanding disc grit for the job.
5
Water in the air supply will cause the internal bearing of the tool to rust and eventually
seize.
Tools Included with your Sander
6
Make sure that your airline is free from water at all times.
7
Always select the correct sanding disc grit for the job.
1 x High Flow Male Air Fitting
Tools Included with your Sander
Vacuum Hose Fitment
1 x High Flow Male Air Fitting
Vacuum Hose Fitment
1 x High Flow Male Air Fitting
Vacuum Hose Fitment

Maintenance

1
If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
usage. These can be obtained from your supplier.
Maintenance
2
Replace worn or damaged parts using genuine parts only.
1
If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
3
Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
conditions.
4
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
To empty dust bag, open zip (see image left) and tip into a suitable waste container.
Maintenance
usage. These can be obtained from your supplier.
1
If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
2
Replace worn or damaged parts using genuine parts only.
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
3
Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
conditions.
usage. These can be obtained from your supplier.
4
To empty dust bag, open zip (see image left) and tip into a suitable waste container.
2
Replace worn or damaged parts using genuine parts only.
3
Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
conditions.
4
To empty dust bag, open zip (see image left) and tip into a suitable waste container.
T: 01582 661993 F: 01582 667100 E: [email protected]
625626 75mm Air Polisher Manual.indd 5
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
Duren Tools, UK
Fast Mover Tools Limited
E: [email protected] W: www.duren.co.uk
T: 01582 484875
W: www.fastmovertoolsuk.com
Duren Tools, UK
E: [email protected] W: www.duren.co.uk
13/09/2017 14:31