4EVAC 4E-CMT Installation And User Manual - Page 4

Browse online or download pdf Installation And User Manual for Microphone 4EVAC 4E-CMT. 4EVAC 4E-CMT 13 pages.

Print Page

Hacousto Holland bv

Industrieweg 87

2651BC Berkel & Rodenrijs

4E-CMT installation and user guide

Important note: Access level 3 explanation

Opening the device housing or tampering with the network cabling is

restricted. This gives access to all interfaces, internal system

connections and sensitive hardware settings that are of high

importance to system operation mode, hardware reliability and safety

(Access Level 3 according to EN54-16, Annex A). This access level (and

higher) is strictly protected by the manufacturer and reserved only for

service personnel which is trained, approved and officially certified by

the manufacturer. Any actions carried out in Access Level 3 without the

manufacturer's explicit approval may lead to incorrect settings or

hardware damage, causing serious system malfunction, and therefore

are strictly prohibited and void manufacturer's warranty.

3. Configuration settings

Settings for the 4E-CMT are included in the configuration file located on the micro SD memory card

installed in the 4EVAC system main unit.

This configuration file includes user-defined settings, such as:

zone selection buttons;

sources available for audio routing (BGM inputs, general purpose messages);

microphone volume level,

TALK button mode (PTT/toggle), etc.

The configuration file should be prepared in 4EVAC Manager. 4EVAC Manager is GUI software running on

Windows OS. More information about 4EVAC Manager can be found in the software manual "4EVAC

Manager guide".

NOTE: Please make sure that the configuration file is prepared with the version of 4EVAC Manager

compatible with the firmware version of the system.

The installation file of the latest 4EVAC Manager and the manual are available at our website

www.4EVAC.com

Page 4 of 13

Author: