AddSecure Tor V Installation Manual - Page 18

Browse online or download pdf Installation Manual for Transmitter AddSecure Tor V. AddSecure Tor V 20 pages. Alarm transmitter

Print Page

APPENDIX – INSTRUCTIONS FOR MEASURING THE SIGNAL STRENGTH ON

A COMPUTER

These instructions describe a general configuration for measuring the GSM signal strength on a

computer. The measurement is only available before the alarm transmitter is commissioned;

afterward, this function is turned off.

Requirements

To measure signal strength, you need:



Computer with a browser



Crossover Ethernet RJ45 TP

network cable

Instructions

Here are only the details necessary to

measure signal strength in your web

browser.

Configure your computer for DHCP (you automatically get an IP address between

172.20.20.20 and 172.20.20.250).

Connect the computer to ETH 1 in the Tor V with a crossover network cable

(Ethernet RJ45 TP).

Connect to this address using your browser: http://172.20.20.1:3080

You now see a number between 0 and 31. The number corresponds to the signal strength that

the alarm transmitter currently has. The page is updated continuously.

If you need help configuring the computer, please turn to the IT department at your company

and give them these instructions.

AddSecure Tor V, PDK-11606