Durite 0-647-36 Manual - Page 6

Browse online or download pdf Manual for Battery Charger Durite 0-647-36. Durite 0-647-36 7 pages. 6/12v 6.5a digital battery charger - norm, agm, std, gel & li-ion

Print Page

Code Display

1. Automatically enter float mode

The charger will enter float mode automatically when finished charge to prevent

overcharge.

2. DC input short-circuit protection

The charger will shut down automatically when DC input short-circuit.

3. Over-temperature protection

The charger will shut down in two situations as below, and it will enter charge

mode automatically when temperature recovers to the normal condition.

a. When charger used long time under high temperature.

b. When inside temperature of charger reaches the present temperature.

4. Over-voltage protection

5. Fire protection

There is no output in the clamp when disconnected with battery.

6. Low-voltage activation

The charger will enter the charge mode automatically when voltage of end of

clamp was higher than DC 1.5V, the charger will not output if voltage is lower

than DC 1.5V.

0-647-36-LEAF