Data Harvest EASYSENSE V-Log User Manual - Page 3

Browse online or download pdf User Manual for Data Loggers Data Harvest EASYSENSE V-Log. Data Harvest EASYSENSE V-Log 17 pages.

Print Page

EASYSENSE V-Log User Guide

Getting to know your V-Log data logger

Connect V-Log directly to a USB port on your computer*, or a powered USB hub, or a USB mains charger

that outputs 5 V at 1 A or more, using the USB cable supplied. A full charge can take up to 8 hours.

A battery charging symbol will be displayed on V-Log's screen while the logger is charging.

*Your computer must be turned on and not in sleep or standby mode; otherwise the battery may drain

instead of charge

V-Log8 Sound sensor

LCD display

USB input

Built-in rechargeable battery

The ENTER button is used to start data collection, progress to the next screen, confirm a choice or

take a sample.

The square STOP button is used to stop data being recorded or return to the previous screen.

The SCROLL buttons are used to scroll through menus on the LCD screen or to browse

measurements during data logging.

 Data Harvest Group Ltd, 2014

Charge EASYSENSE V-Log fully before first use

V-Log8 Light sensor (visible)

Plug-in sensors inputs

V-Log8 Air Pressure & Humidity sensor

STOP or BACK

button

DS133 (5)

Battery power

level indicator

SCROLL up button

ENTER or SELECT button

SCROLL down button