Data Industrial 340LW Series Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Transmitter Data Industrial 340LW Series. Data Industrial 340LW Series 13 pages. Btu transmitter

Print Page

Special notes for operation

1. comm status

=0 - booted up, no comm with internal uart

=1 - connected to internal uart

=2 - L

ORKS

=3 - Commode

2. units that must be set by the 340 PC software for this software rev. to work properly

gpm

gallons

kbtu/hr

btu

3. all Configuration Properties (CPs) are set to ten second updates for each outgoing measurement network variable,

can be modified via LonMaker Browser

4. internal measurement readings are updated every ten seconds (this update rate is not changeable)

5. to reset total, send the following to nvi00Request in the LonMaker Browser

"1,RQ_OVERRIDE"

"2,RQ_OVERRIDE"

either of the above will reset both flow total and energy total

mode

Object #0 - Node Object

Inputs

Object #1 - Flow Object

Object #2 - Energy Object

Object #3 - Temperature Object

Object #4 - Comm Status

Data Industrial

Series 340LW Owner's

Outputs

Manual