Data Signs PTL Compact 1 Operation And Maintenance Manual - Page 13

Browse online or download pdf Operation And Maintenance Manual for Safety Equipment Data Signs PTL Compact 1. Data Signs PTL Compact 1 19 pages. Portable traffic lights

Print Page

Type 1 PTSS — Startup and Shutdown

using the PTL Remote

Type 1 PTSS — Self-Test using the

PTL Remote

SETTING THE RF CHANNEL ON THE REMOTE CONTROL.

To set the RF Channel on the Remote Control, follow these instructions.

1. Press the MENU button on the bottom of the screen to go to settings.

2. Press the RF Channel option.

3. Enter the new channel number.

4. To re-start normal operation, press the BACK button.

Select Type 1 Power On/Off from the menu.

To startup from shut down state, press the button on the

screen for 5 seconds. Alternatively, to startup from an inactive

state, use the same button and press for 5 seconds.

In shutdown state, the lights are disabled and the LCD's on the

PTL Controllers are turned off.

When the SELF TEST button is pressed, the following

sequence is run on the PTL Compact to test the aspects, on

any connected units:

Green signal, yellow signal, red signal and blank for 0.2

seconds.

Note: the Red and Green Times are reset to the default times

of Green = 1 Seconds, Red = 5 Seconds.

It is advisable that the self-test not be carried

out while the PTL Compact are setup on the

roadway.

P T L O P E R A T I O N S M A N U A L