Data Signs RF REMOTE Manual - Page 3

Browse online or download pdf Manual for Remote Control Data Signs RF REMOTE. Data Signs RF REMOTE 6 pages.

Print Page
RF Remote for Type-2 use
Channel: 8 Total Units: 2
M: PTLN2
S1: PTLN1
Mode: Shuttle
Red: 5 seconds
M
STOP
GO
To enter a Demand for either Red or Green signal phase, tap
the STOP or GO buttons. On each Demand, the DEMAND LED's
will flash to indicate a demand on the Master or the Slave.
The display screen will indicate whether the Master is in the
correct mode to use the Remote Control. It will also show
relevant status and time left for a selected phase. The current
signal phase on the Master and Slave unit 1 is shown on the
Remote Control.
Note: There may be a slight delay in the signal phase change shown for the Slave.
S1
STOP
GO
MENU
R F R E M O T E M A N U A L
The Optional Remote is used
by the operator to control
traffic flow when the Master
Controller has been set to
Manual mode. It is recharged
by placing it in the cradle in
the Master Control box and
connecting the charge cable.
To switch on the PTL-Remote,
press the
The startup screen will appear
after a few seconds.
To SHUTDOWN the PTL-
Remote, press and hold
the
button.
The unit will shut down.
button.
3