DURKOPP ADLER 767 - Instruction Manual - Page 13

Browse online or download pdf Instruction Manual for Sewing Machine Accessories DURKOPP ADLER 767 -. DURKOPP ADLER 767 - 18 pages. Converting bobbin hook clb 300
Also for DURKOPP ADLER 767 -: Instructions Manual (16 pages), Installation Instructions Manual (16 pages)

Print Page

3.3 Checking positioning

The sewing machine should be positioned with the thread lever at top dead centre.

The position transmitter 2 is fixed to the shaft with the position-transmitter ring 1. With

fully-assembled sewing machines the pre-set position is indicated by a coloured mark.

Checking positioning

–

Switch on the sewing machine. Pull pedal fully back and hold it there.

The thread is clipped and the sewing machine positioned in the 2nd position.

–

Check with the handwheel whether the thread lever is at top dead centre.

Correcting positioning

If positioning is incorrect the reference point must be reset with the control unit.

This adjustment is described in the service manual.