DUROFIX RZ4012 Information Manual - Page 12

Browse online or download pdf Information Manual for Power Tool DUROFIX RZ4012. DUROFIX RZ4012 17 pages. Oil pulse tool

Print Page

FORWARD / REVERSE LEVER

A forward/reverse lever determines the direction of the tool and also serves as a lock

off button. To select forward rotation, RELEASE THE EC SWITCH (see Fig. 1A),

and push the forward/reverse lever (see Fig. 2B), toward left side of the tool. To select

reverse, push the forward/reverse lever, toward right side of the tool. The centre

position of the control button locks the tool in the off position. When change the

position of the control button, making sure the trigger is released.

NOTE: The first time the tool is run after changing the direction of rotation, you may

hear a click on start up. This is normal and does not indicate a problem.

BUILT-IN LED LIGHT

A built-in LED light can illuminate the work area and improve vision when driving in

areas with insufficient light.

ELECTRIC BRAKE

The EC switch is equipped with a circuit design electric of brake function. The tool

will consistently operate to quickly stop rotating after the EC switch release.

TORQUE ADJUSTMENT IN FORWARD ROTATION (CW) ONLY

Release the trigger, then push the forward/reverse leaver to centre.

Insert an Allen key (3mm) in the hole to adjust the relief valve as the following Fig.

3 to increase the oil pressure or decrease the oil pressure. Turn in clockwise for

rise the torque, turn in counter clockwise for decrease the torque.

FIG. 2