Addtron Technology AWS-110 Quick User Manual - Page 5
Browse online or download pdf Quick User Manual for Wireless Access Point Addtron Technology AWS-110. Addtron Technology AWS-110 6 pages. 11mbps wireless access point
Also for Addtron Technology AWS-110: User Manual (15 pages)
Using the SNMP Manager when users do not know the IP address
1.
On the Start menu, Select SNMP Manager.
2.
Select "Find Access Point" option on the "File" menu.
3.
The available Access Points are listed on the windows.
4.
Select one of the available Access Points and press "Connect".
5.
Users are ready to do the configuration.
Access Point Firmware Upgrade
The firmware upgrade can be done either through the Ethernet port by using the TFTP Client Utility or the USB
port by using the DFU Utility
Using the Ethernet Port
1.
Install the TPTP Client.
2.
Find the "TFTP.zip" file in the "Utility" folder of your CD.
3.
Extract the "TFTP.zip" file.
4.
Run the program "setup.exe".
5.
Follow the instructions of the set-up program to complete the installation of the TFTP Client Utility.
6.
On the Start menu, select TFTP Client
7.
Type the IP address of the Access point.
8.
Browse for the file "bridge.rom".
9.
Press the "Download image" button to download the firmware.
10. If the firmware download procedure is completed successfully, the "Firmware download has been
completed" message shows.