DataApex Shimadzu LC-10 Manual - Page 16

Browse online or download pdf Manual for Water Pump DataApex Shimadzu LC-10. DataApex Shimadzu LC-10 19 pages. Metal free pump

Print Page

4 Using the control module

4.3 Device Monitor

The pump status dialog can be invoked by the Monitor - Device Monitor

command from the

icon. It displays the actual flows of particular solvents, as well as the total

flow, the total pressure and the analysis time. In the individual section of

the Shimadzu LC-10/20 Pump the status of the pump may be seen.

Stop Flow

The pumps can be stopped from this window using the Stop Flow button.

This action will stop the pump only, the analysis run will continue and

must be stopped or aborted from the

Analysis

Purge

The pumps may be purged by pressing this button. Set the desired total

flow and solvent ratios in the opened

Resume Idle

Returns the pumps to IDLE state as defined in the appropriate field on the

LC Gradient

Instrument

Fig 8: LC monitor and Shimadzu LC-10/20 Pump Monitor

dialog.

tab of the

Method Setup

window or using the Device Monitor

Data Acquisition

Set Flow

Fig 9: Set Flow

dialog.

- 12 -

Clarity Controls

window or

dialog.

Single