DataBay AVE-308TR User Manual - Page 8

Browse online or download pdf User Manual for Extender DataBay AVE-308TR. DataBay AVE-308TR 11 pages. Vga and audio cat-x av extender
Also for DataBay AVE-308TR: User Manual (16 pages)

Print Page

User Manual

() Local Function Test: Power on your AV device, the "ACTIVE" LEDs of

Transmitter will turn on orange to indicate the video activation, and you

should ready to do AV broadcasting.

VGA/Audio

Installation Diagram of System Transmitter

(4) Receiver Installation: Please follow previous section for AVE-01R to

install the system Receiver, and the maximum extended length of this

section should not exceed 00 meters.

(5) Transceiver Installation: If you wish to have more AV displays, you can

use system Transceiver, you may use 4/8-Port Transceiver model to

expand one AV signal to 4/8 AV signals. In the other way, you may stack

more system Transmitter through their local AV port to generate more

AV RJ-45 outputs locally and the maximum local stacking capacity is

limited to 4 layers to ensure good broadcasting quality. Please follow

next two section for instruction.

4/8/16-Port Transmitter

VGA/Audio

Projector

Use Cat5e cable

Max : 00M

4/8/16-Port Transmitter

4/8-Port Transceiver

Installation Diagram of System Receiver and Trans

(6) System Expansion through UTP: This series can stack into maximum

three layers of UTP section to reach more AV outputs and depends on

the display devices, you may reach a lower VGA solution than single

layer. The suggested range of VGA broadcasting is 800x600@900m,

180x104@600m, and 048x156@00m. Please be noted that you

must use Transceiver for intermediate expansion.

VGA/Audio

Projector

Cat5e cable-Layer 1

Transmitter

Transceiver

Stack Three Layers of AV Extender through Cat5e to Reach more Displays

PDP

LCD

CRT

VGA output Devices

One-Port Receiver

4/8 RJ45

AV Outputs

Receivers

4～8 Set Cat5e

PDP

LCD

CRT

VGA output Devices

One-Port Receiver

Cat5e cable-Layer