Cavalry CADA-SA8 Series Install Manual - Page 9

Browse online or download pdf Install Manual for Storage Cavalry CADA-SA8 Series. Cavalry CADA-SA8 Series 13 pages. Cavalry cada002sa8: install guide
Also for Cavalry CADA-SA8 Series: User Manual (20 pages)

Print Page

5) Now you can connect your CADA-SA8 to the card via the TWO eSATA cables (one

per channel) to both eSATA ports on the PCI Card you installed. On the back of the

CADA-SA8, there are two channels for eSATA—you need to use one cable per

channel. Turn on the CADA-SA8, wait about one minute for the RAID5 controller card

to recognize the drive. You may see a window pop-up that says "New event

detected". If so, click OK to continue. Your RAID5 configuration manager screen

should look similar to this.

If your drive doesn't look like this (perhaps with yellow, red or grey boxes in place of

the green boxes) email customer support: [email protected].

NOTE: for PCI-X users, there would be two columns of blank boxes as well.

If it looks like this, it is set up correctly in a RAID 5 configuration. GO ON TO STEP 6.