ELRO AG400011 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Security System ELRO AG400011. ELRO AG400011 5 pages. Home alarm system with smartphone app & dialer
Also for ELRO AG400011: Quick Start Manual (6 pages)

Print Page

HOME ALARM

AG400011

AG4000 Alarm panel

Congratulations on your purchase of the ELRO AG400011 Home Alarm system. You have just

purchased one of the most advanced and feature-rich wireless security systems on the market

today.

We recommended you go through the User's Instructions to fully understand the system and

plan your installation. If you wish to set up the system immediately, please read this guide first.

This quickstart guide describes the basic steps to install your AG400011 Home Alarm System

(alarm panel, window sensors, motion sensor and RFID keychain transmitter).

ALARM PANEL OVERVIEW

A. Touch keypad

D. RFID sensor area

B. Microphone

E. GSM status led

C. Siren

F. Speaker

– Quick Start Guide

AG40PR11A

AG40MA11A

AG40RE11

door/window

Remote

PIR Motion sensor

contact

AG40TA13

Alarm Tags

G. Battery cover

H. Wall mounting bracket

Step 1 – Power on and SIM Card Installation

1. Remove battery cover of the alarm panel.

2. Insert a SIM card into the slot and connect the Li-ion cell

2000mAh 3.7V and the 9V power adapter..

Note: SIM card needs to be unlocked before use. You can

use a mobile phone to cancel the input of PIN code or PUK

code.

3. Wait until the GSM status led blinks slowly (once every 3

seconds) implying the SIM card is ready for use.

Step 2 – Insert the batteries

1. Install batteries in the included accessories.

2. Open the PIR rear cover and insert the batteries (Figure A)

3. Twist open the battery cover of the remote control and insert the coin cell battery inside.

(Figure B). Replace the cover and press any key to ensure the red LED on the remote light up

4. Open the door/ window contact battery cover and insert the 3 batteries (Figure C)

Step 3 – Setting up the GSM host number

1. Begin configuration by entering the default configuration PIN code '1234'

1234

(example: 1234 + 66 +

+ 09 5555 1212 +

2. You will receive an SMS message saying phone number set successfully.

3. Your alarm panel can now be controlled from the smartphone app (Step 9).

Owner's

Phone number

)